196cc

  • DJ-1110 Dyno "Super Box" CM Cam

    DJ-1110 Dyno "Super Box" CM Cam

    (2)

    Dyno "CM" Modified Superbox Cam for Honda GX200 or BSP Clone 6.5 with bored stock carb or tilly carb.This Cam is Heat TreatedAgressive ramp cam for Modified class motor.Use with bored stock or Tillotson carbRequires upgraded spring package, billet rod...
    Дин.6.681,38
    Add to Cart The item has been added
  • DJ-1111 Cam; MOD 2

    DJ-1111 Cam; MOD 2

    (5)

    "Mod 2" Cheater Stock Cam for Honda GX200, BSP, or Blue Clone 6.5 HP enginesThis cam meets the 2012 Builder's Prepared class rules. Requires an upgraded spring package, billet rod, and flywheel. It's also a great cheater stock cam if there are no...
    Дин.6.681,38
    Add to Cart The item has been added
  • DJ-1112 Dyno .308 cam GX200, Clone, Hemi

    DJ-1112 Dyno .308 cam GX200, Clone, Hemi

    (2)

    This welded and ground cam provides .308" lift at the cam, which works out to .320" lift with the stock rockers. For open modified applications. The 308 is our most popular grind for modified clone class. This cam is easy on the valve train and has a...
    Дин.12.965,81
    Add to Cart The item has been added
  • DJ-1113 CL-2 Box Stock Cam

    DJ-1113 CL-2 Box Stock Cam

    (3)

    Released 4/26/2013 the CL-2 cam from Dyno Cams is the latest for the Box Stock class. This cam will fit in a 196cc OHV Box Stock, clone or GX200/160 engine. This heat treated cam was designed as a replacement for the CL-1i and should always...
    Дин.5.378,48
    Add to Cart The item has been added
  • DJ-1114 CL3 Dyno Honda/Clone/Hemi Cam

    DJ-1114 CL3 Dyno Honda/Clone/Hemi Cam

    (2)

    The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak horsepower. This cam will fit the Honda/ Clone engines...
    Дин.5.378,48
    Add to Cart The item has been added
  • DJ-1115 Cylinder Head, Clone-bare

    DJ-1115 Cylinder Head, Clone-bare

    (1)

    The bare head with valve guides installed and valve seats installed and cut. This head accepts the 24mm Ex & 25mm In valves.  This is a JT casting head and is legal for WKA/AKRA/NKA clone classes. It has shown good overall peak power with...
    Дин.2.621,29
    Add to Cart The item has been added
  • DJ-1117 Honda GX200/Clone CL4 Cam

    DJ-1117 Honda GX200/Clone CL4 Cam

    DESCRIPTION The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM range. The CL4 shows gains in the 6600 RPM range over...
    Дин.5.944,70
    Add to Cart The item has been added
  • DJ-1121 Stainless Steel Valve (25mm)

    DJ-1121 Stainless Steel Valve (25mm)

    (3)

    Valve head measures 25mm, total length is 2.575" (+/-.004") and are top quality Stainless Steel. It has an automotive radius-type keeper groove. This Valve will not work with stock retainers. Will fit stock 5.5mm valve guides.  Use ARC#...
    Дин.1.755,87
    Add to Cart The item has been added
  • DJ-1121-070 SS Intake Valve 25mm +.070 longer

    DJ-1121-070 SS Intake Valve 25mm +.070 longer

    This valve is .070 longer overall length is 2.650, head measures  25mm, and it has a radius-type keeper groove. This Valve will not work with stock retainers. Will fit stock 5.5mm valve guides.  Use ARC# DJ-1047 retainers for 22 or...
    Дин.2.144,48
    Add to Cart The item has been added
Compare (0)
!