6437 Starter Nut Honda/Clone/Pred/Yamaha 14-1.5 Extended (3) 14-1.5mm Thread Extended Starter Nut for Honda /196 Clone / Predator 212 and Yamaha. 2.625" overall length. Uses 3/4" socket wrench. €15,62 Add to Cart The item has been added Compare
6521 ARC Short Heavy Duty Wrist Pin for Wiseco Piston (4) Short heavy duty .490 wrist pin for Wiseco pistons. This pin weighs in at 28 grams. Unlike the other heavy duty wrist pin we carry(p/n 6522) this new wrist pin does not need to be cut down to be used with a Wiseco or J E piston in our Animal,... €24,55 Add to Cart The item has been added Compare
6522HD .490 x 2.075 HD Wrist Pin Heavy Duty .490" Tapered Bore Wrist Pin made from High Strength tool steel.This Pin features a tapered I.D. for increased strength and rigidity. 2.075" long and may require shortening depending on application. Weighs in at 31grams. Fits most 3"... €27,06 Add to Cart The item has been added Compare
6523 Wrist Pin Short .490 Wiseco Wrist Pin Recommended for flat head applications only! €9,30 Add to Cart The item has been added Compare
6524 Wiseco Circlips (1) Wiseco CS-13 Circlips for the .490 wrist pin €4,38 Add to Cart The item has been added Compare
6532 1.005 Raptor Crank Gear Hardened billet crank gear for the Briggs 5hp Raptor flathead. 1.005" I.D. 26 tooth. €33,94 Add to Cart The item has been added Compare
6533 Animal Billet Crank Gear Hardened steel billet crank gear for the Briggs Animal/Intek 206 stock crankshaft. €29,47 Add to Cart The item has been added Compare
6534 Crank Gear, Animal Stroker This Crank Gear is a must when using an ARC #6580 Crankshaft or a Briggs #555204(495645) Crank.This is the gear to use for the Animal Stroker. 1.005" I.D. €33,94 Add to Cart The item has been added Compare
6535 Crank Gear Crank Gear for the Intek 305 Stroker * * ATTENTION * * This gear was designed to be used only with the #6585 or the #6586 ARC Billet Crankshafts. It will not fit the stock crank. €29,47 Add to Cart The item has been added Compare
6536 Crank Gear Crank Gear GX200 6.5 OHV Stroker * * *Attention* * * This gear is designed to be used only with the 6573 Crankshaft * * €21,60 Add to Cart The item has been added Compare
6554 "Trick" Crank Bearing Mag Side Briggs 5HP Flathead ID .875 OD 2.048 W .500 (1) Crank Bearing Mag(Flywheel) Side.ID .875" OD .2.048" Width .500"Excellent Quality aftermarket "Trick" ball bearings can be used with a variety of stock 5hp Briggs and aftermarket single and dual bearing crankshafts. €11,07 Add to Cart The item has been added Compare
6562-C ARC Billet Crankshaft: B&S Model 28 (stock stroke) (2) ARC Billet Crankshaft 3.06" stroke(stock stroke) for the Briggs Mod 28 flathead Vertical shaft engine. The 6562-C is made from 4340 Hardened Chromoly Steel. It is balanced by design to eliminate the need for Synchro-Balance systems... €507,69 Add to Cart The item has been added Compare
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)
_category.original.jpg)