ARC Billet Cranks & Related

4675 Splined Clutch Post Holder

Post Holder for the ARC splined clutch post. Holder may be clamped into vise for ease of clutch maintenance and adjustment.

﷼20.328

Add to Cart The item has been added

Compare
6432 Starter Nut Briggs 5hp Flathead 5/8-18

(2)

Starter Nut for Briggs 5HP Flathead 5/8 x 18 thread pitch 1.375" overall length. Uses 3/4" socket wrench.

﷼6.725

Add to Cart The item has been added

Compare
6433 Starter Nut Animal/GX390 16 x 1.5

Starter Nut for Metric Animal and Honda GX390 16 x 1.5mm thread pitch. 1.375" overall length. Uses 3/4" socket wrench.

﷼6.725

Add to Cart The item has been added

Compare
6434 Starter Nut 5/8-18 Briggs 5HP Flathead Extended

Extended Starter Nut Briggs 5hp Flathead. Thread 5/8 - 18 and 2.625" overall length. Uses 3/4" socket wrench.

﷼6.725

Add to Cart The item has been added

Compare
6435 Starter Nut Extended Animal/GX390 16 X 1.5

Extended Starter Nut for Metric Animal/Honda GX340/39016 X 1.5mm Thread Pitch and 2.625" overall length. Uses 3/4" socket wrench.

﷼6.725

Add to Cart The item has been added

Compare
6436 Starter Nut Honda/Clone/Yamaha 14-1.5 Stubby

(1)

Starter Nut for Honda / Clone and Yamaha14-1.5mm thread pitch and 1.375" overall length. Uses 3/4" socket wrench.

﷼6.725

Add to Cart The item has been added

Compare
6532 1.005 Raptor Crank Gear

Hardened billet crank gear for the Briggs 5hp Raptor flathead. 1.005" I.D. 26 tooth.

﷼14.611

Add to Cart The item has been added

Compare
6533 Animal Billet Crank Gear

Hardened steel billet crank gear for the Briggs Animal/Intek 206 stock crankshaft.

﷼12.684

Add to Cart The item has been added

Compare
6534 Crank Gear, Animal Stroker

This Crank Gear is a must when using an ARC #6580 Crankshaft or a Briggs #555204(495645) Crank.This is the gear to use for the Animal Stroker. 1.005" I.D.

﷼14.611

Add to Cart The item has been added

Compare
6535 Crank Gear

Crank Gear for the Intek 305 Stroker * * ATTENTION * * This gear was designed to be used only with the #6585 or the #6586 ARC Billet Crankshafts. It will not fit the stock crank.

﷼12.684

Add to Cart The item has been added

Compare
6536 Crank Gear

Crank Gear GX200 6.5 OHV Stroker * * *Attention* * * This gear is designed to be used only with the 6573 Crankshaft * *

﷼9.296

Add to Cart The item has been added

Compare
6554 "Trick" Crank Bearing Mag Side Briggs 5HP Flathead ID .875 OD 2.048 W .500

(1)

Crank Bearing Mag(Flywheel) Side.ID .875" OD .2.048" Width .500"Excellent Quality aftermarket "Trick" ball bearings can be used with a variety of stock 5hp Briggs and aftermarket single and dual bearing crankshafts.

﷼4.764

Add to Cart The item has been added

Compare