-
-
DJ-1251 BSP/Clone GX140 "E" Tube
(5)
This E-tube has a slightly larger main bore and less air bleed holes providing a better fuel signal at the jet. Improves performance across the RPM range, but especially on bottom end and mid range...kr922 -
DJ-1260 Ignition Coil with Spark Plug Cap
(2)
OEM stock ignition coil for BSP /Clone 196cc, GX200, and Predator 212cc engines.kr2.229 -
DJ-1261 Stock Clone/GX200 Spark Plug Cap
This is a standard stock spark plug cap for the Clone/GX200 Engines.kr461 -
DJ-1265 Stock Sidecover/Bare GX200/Clone
Side Cover for GX200 / Clone EnginesThis is the factory standard, stock side cover. It comes to us bare, no gasket, bearing, or hardware. Check related items for accessorieskr3.489 -
-
DJ-1275 Clone 196cc/GX200 Stock OEM Crankshaft
(2)
BSP Clone 196cc(GX200 Chinese replacement) stock crankshaft will average 2.125-2.129" and have a flame hardened journal.kr4.841 -
DJ-1275-58 58mm Stroke OEM Crankshaft
OEM stock replacment 58mm stroke (2.280-2.283") with a 1.180'' Honda/Clone crank pin and Honda GX200 Flywheel Taper. Will need an undecked or tall deck block along with moderate block and cam...kr4.918 -
DJ-1275MS Max Stroke Crankshaft, GX200/Clone 196cc
(1)
The Max Stroke Crank from BSP allows the maximum stroke per the AKRA/NKA rules. These cranks will average 2.130 - 2.133" total stroke and have a flame hardened 1.180" journal.kr7.377 -
DJ-1280-05 Stock BSP/Clone Connecting Rod +.005 3.308
Stock BSP/Clone Connecting Rod +.005 3.308kr1.990 -
DJ-1280-10 Stock Connecting Rod, Clone/GX200 +.010
Clone/GX200 3.313" long stock rod. This is a stock, cast rod that is +.010" over stock length. If the top of the piston is .015" or more down in the bore from the cylinder's gasket surface when the...kr1.990 -
DJ-1280-M5 STOCK CONNECTING ROD CLONE/GX200 -.005
CLONE/GX200 3.298 Long Stock Rod.This is a stock cast rod that is -.005 under stock lenthkr1.990