-
DJ-1250H GX200 4 Hole Carb Nozzle Jet
GX200 4 Hole Carb Nozzle JetP53.55Add to Cart The item has been added -
DJ-1251 BSP/Clone GX140 "E" Tube
(5)
This E-tube has a slightly larger main bore and less air bleed holes providing a better fuel signal at the jet. Improves performance across the RPM range, but especially on bottom end and mid range...P89.25Add to Cart The item has been added -
DJ-1261 Stock Clone/GX200 Spark Plug Cap
This is a standard stock spark plug cap for the Clone/GX200 Engines.P44.62Add to Cart The item has been added -
DJ-1265 Stock Sidecover/Bare GX200/Clone
Side Cover for GX200 / Clone EnginesThis is the factory standard, stock side cover. It comes to us bare, no gasket, bearing, or hardware. Check related items for accessoriesP337.66Add to Cart The item has been added -
DJ-1275 Clone 196cc/GX200 Stock OEM Crankshaft
(2)
BSP Clone 196cc(GX200 Chinese replacement) stock crankshaft will average 2.125-2.129" and have a flame hardened journal.P468.55Add to Cart The item has been added -
DJ-1275-58 58mm Stroke OEM Crankshaft
OEM stock replacment 58mm stroke (2.280-2.283") with a 1.180'' Honda/Clone crank pin and Honda GX200 Flywheel Taper. Will need an undecked or tall deck block along with moderate block and cam...P475.99Add to Cart The item has been added -
DJ-1275MS Max Stroke Crankshaft, GX200/Clone 196cc
(1)
The Max Stroke Crank from BSP allows the maximum stroke per the AKRA/NKA rules. These cranks will average 2.130 - 2.133" total stroke and have a flame hardened 1.180" journal.P713.99Add to Cart The item has been added -
DJ-1280-05 Stock BSP/Clone Connecting Rod +.005 3.308
Stock BSP/Clone Connecting Rod +.005 3.308P192.63Add to Cart The item has been added -
Sold out
DJ-1280-M5 STOCK CONNECTING ROD CLONE/GX200 -.005
CLONE/GX200 3.298 Long Stock Rod.This is a stock cast rod that is -.005 under stock lenthP192.63 -
DJ-1281 Piston Circlip GX200/Clone
Stock Cir Clip for the GX200 / Clone This is a single, so remember to order two if you need a set.P18.59Add to Cart The item has been added -
DJ-1282 Wrist Pin GX200/Clone / Pred
Light weight performance wrist pin for the GX200 / Clones / Predator. Weighs 43.3 grams at 2.106" long and .543 ID. AKRA, NKA, and WKA legal.P33.02Add to Cart The item has been added -
DJ-1284 GX200/Clone Piston Only -std
Standard, stock size(68mm) piston for the GX200/196c Clone engines.P145.03Add to Cart The item has been added
