Categories - Page 50

6607-GX200/Clone 196 Billet Flywheel 5-3/4" Diam. Finned 3.5lbs

ARC Racing SFI certified Billet Aluminum Flywheel 6607-GX200 for the Honda GX200/Clone Clone 196cc, Ducar 196/212 and Tillotson 196/225/228/236, WildCat 223, Predator Ghost 212 and Predator 224cc NON Hemi Engines. 5-3/4" diameter(3hp) adjustable timing...

RM905.76

Add to Cart The item has been added

Compare
MT-SP1434 Max Torque 14 Tooth Drive Sprocket. #35 Chain X 3/4"

(1)

Max Torque 14 Tooth Drive Sprocket with Bronze Bushing. These #35 chain steel clutch driver gears are made for 3/4" output shaft. They have an oil-lite bronze bushing installed. Applied a thin coat of gear oil to the bronze bushing before installing on...

RM116.59

Add to Cart The item has been added

Compare
MT-SP1534 Max Torque 15 Tooth Drive Sprocket. #35 Chain X 3/4"

(1)

Max Torque 15 Tooth Drive Sprocket with Bronze Bushing. These #35 chain steel clutch driver gears are made for 3/4" output shaft. They have an oil-lite bronze bushing installed. Applied a thin coat of gear oil to the bronze bushing before installing on...

RM116.59

Add to Cart The item has been added

Compare
MT-SP1634 Max Torque 16 Tooth Drive Sprocket. #35 Chain X 3/4"

Max Torque 16 Tooth Drive Sprocket with Bronze Bushing. These #35 chain steel clutch driver gears are made for 3/4" output shaft. They have an oil-lite bronze bushing installed. Applied a thin coat of gear oil to the bronze bushing before installing on...

RM138.74

Add to Cart The item has been added

Compare
MT-SP1734 Max Torque 17 Tooth Drive Sprocket. #35 Chain X 3/4"

Max Torque 17 Tooth Drive Sprocket with Bronze Bushing. These #35 chain steel clutch driver gears are made for 3/4" output shaft. They have an oil-lite bronze bushing installed. Applied a thin coat of gear oil to the bronze bushing before installing on...

RM138.74

Add to Cart The item has been added

Compare
MT-SP1834 Max Torque 18 Tooth Drive Sprocket. #35 Chain X 3/4"

Max Torque 18 Tooth Drive Sprocket with Bronze Bushing. These #35 chain steel clutch driver gears are made for 3/4" output shaft. They have an oil-lite bronze bushing installed. Applied a thin coat of gear oil to the bronze bushing before installing on...

RM138.74

Add to Cart The item has been added

Compare
MC-CHT MyChron Cylinder Head Temp Sensor

Cylinder Head Temperature Sensor For use with the MyChron4 datalogger 1 piece, 60" in length

RM348.37

Add to Cart The item has been added

Compare
Sold out

MC-BR MyChron Beacon Receiver

(1)

Timing Beacon Receiver For use with the MyChron4 datalogger

RM339.08

Out of stock

Compare
MC-RPM MyChron RPM (tach) Sensor

Tach Sensor wire and spark plug wire clip.For use with the MyChron4 dataloggerHint, there is nothing special about this wire. Any wire that fits will work.

RM60.38

Add to Cart The item has been added

Compare
CT-100 BSP TECH KIT

TECH KIT FEATURES: Contains - Main Jet .042 No-Go Gauge; -Pilot Jet .019 No-Go Gauge; -Emulsion Tube .066 No-Go GaugeBox Stock Project : Carburetor - Choke Bore .810 No-Go Gauge - Venturi .615 No-Go Gauge - Rear Carb. Bore ...

RM952.20

Add to Cart The item has been added

Compare
5990 ARC Coil Bracket Assembly 3hp Briggs

(4)

Coil Bracket Assembly for Raptor / 3hp flywheels

RM60.38

Add to Cart The item has been added

Compare
6365 ARC Billet Connecting Rod, Briggs Flathead 4.625" Stroker

ARC Billet Rod Stroker Big Fish 4.625" Ctr to Ctr, Uses the 6398 rod bearings. Briggs Flatheads, Junior Dragsters, Open Modifieds Rod bolt torque: 170 in/lbs lubricated

RM482.88

Add to Cart The item has been added

Compare