GX200 / Pred Hemi / Ghost

  • DJ-1103 Cam Clone Dyno BP-2

    DJ-1103 Cam Clone Dyno BP-2

    (2)

     This heat treated stock lift cam was designed to exploit the 2012 Builders Prepared cam rules.This cam meets lift requirements for stock but has a lot of extra duration producing better horsepower over a broader RPM range. Stock setup can be used,...
    $56.05
    Add to Cart The item has been added
  • DJ-1104 Cam, Dyno F275 Clone/GX200

    DJ-1104 Cam, Dyno F275 Clone/GX200

    (2)

    Dyno Cams  Clone/GX200 F-275 Cam Welded Lobe Cam. This versatile cam is to be used in modified or stock appearring applications. Excellent cam when running stock style carburetor. It will require an upgraded spring train package, billet...
    $108.77
    Add to Cart The item has been added
  • DJ-1108 Clone, Hemi .310 Cam

    DJ-1108 Clone, Hemi .310 Cam

    The 310 is a monster camshaft with low lift. This cam has all the duration of our bigger cams, but with .310" lift so ratio rockers can be used in OHV modified applications. This cam requires an upgraded spring package, billet rod, and billet flywheel...
    $108.77
    Add to Cart The item has been added
  • DJ-1109I CL-1 Improved Cam

    DJ-1109I CL-1 Improved Cam

    (1)

    The Dyno CL1 Improved cam has a more retarded centerline for optimal top end horsepower. This Cam is Heat Treated. Also fits the Habor Freight "Hemi" Predator.Engine: 196cc OHV CloneRecommended Class: StockTarget (MAX) RPM: 6000-6500Spring Pressure...
    $45.14
    Add to Cart The item has been added
  • DJ-1110 Dyno "Super Box" CM Cam

    DJ-1110 Dyno "Super Box" CM Cam

    (2)

    Dyno "CM" Modified Superbox Cam for Honda GX200 or BSP Clone 6.5 with bored stock carb or tilly carb.This Cam is Heat TreatedAgressive ramp cam for Modified class motor.Use with bored stock or Tillotson carbRequires upgraded spring package, billet rod...
    $56.05
    Add to Cart The item has been added
  • DJ-1111 Cam; MOD 2

    DJ-1111 Cam; MOD 2

    (5)

    "Mod 2" Cheater Stock Cam for Honda GX200, BSP, or Blue Clone 6.5 HP enginesThis cam meets the 2012 Builder's Prepared class rules. Requires an upgraded spring package, billet rod, and flywheel. It's also a great cheater stock cam if there are no...
    $56.05
    Add to Cart The item has been added
  • DJ-1112 Dyno .308 cam GX200, Clone, Hemi

    DJ-1112 Dyno .308 cam GX200, Clone, Hemi

    (2)

    This welded and ground cam provides .308" lift at the cam, which works out to .320" lift with the stock rockers. For open modified applications. The 308 is our most popular grind for modified clone class. This cam is easy on the valve train and has a...
    $108.77
    Add to Cart The item has been added
  • DJ-1113 CL-2 Box Stock Cam

    DJ-1113 CL-2 Box Stock Cam

    (3)

    Released 4/26/2013 the CL-2 cam from Dyno Cams is the latest for the Box Stock class. This cam will fit in a 196cc OHV Box Stock, clone or GX200/160 engine. This heat treated cam was designed as a replacement for the CL-1i and should always...
    $45.12
    Add to Cart The item has been added
  • DJ-1114 CL3 Dyno Honda/Clone/Hemi Cam

    DJ-1114 CL3 Dyno Honda/Clone/Hemi Cam

    (2)

    The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak horsepower. This cam will fit the Honda/ Clone engines...
    $45.12
    Add to Cart The item has been added
  • DJ-1117 Honda GX200/Clone CL4 Cam

    DJ-1117 Honda GX200/Clone CL4 Cam

    DESCRIPTION The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM range. The CL4 shows gains in the 6600 RPM range over...
    $49.87
    Add to Cart The item has been added
Compare (0)
!