Predator Engines

  • DJ-1113P CL-2 Predator Cam

    DJ-1113P CL-2 Predator Cam

    Heat treated Dyno Cam for the Gen 1 & 3 Harbor Freight 212cc Predator engine. This heat treated cam was designed as a replacement for the CL-1 and should always be run with a billet flywheel. The newly designed intake and exhaust lobes...
    ﷼186.21
    Add to Cart The item has been added
  • DJ-1114 CL3 Dyno Honda/Clone/Hemi Cam

    DJ-1114 CL3 Dyno Honda/Clone/Hemi Cam

    (2)

    The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak horsepower. This cam will fit the Honda/ Clone engines...
    ﷼186.21
    Add to Cart The item has been added
  • DJ-1114P CL-3 Dyno Predator Non Hemi Cam

    DJ-1114P CL-3 Dyno Predator Non Hemi Cam

    Description The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak horsepower. The lobes are hardened for...
    ﷼186.21
    Add to Cart The item has been added
  • DJ-1117 Honda GX200/Clone CL4 Cam

    DJ-1117 Honda GX200/Clone CL4 Cam

    DESCRIPTION The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM range. The CL4 shows gains in the 6600 RPM range over...
    ﷼205.82
    Add to Cart The item has been added
  • DJ-1117P non hemi pred CL4 Cam

    DJ-1117P non hemi pred CL4 Cam

    Description The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM range. The CL4 shows gains in the 6600 RPM range over our...
    ﷼205.82
    Add to Cart The item has been added
  • DJ-1121 Stainless Steel Valve (25mm)

    DJ-1121 Stainless Steel Valve (25mm)

    (3)

    Valve head measures 25mm, total length is 2.575" (+/-.004") and are top quality Stainless Steel. It has an automotive radius-type keeper groove. This Valve will not work with stock retainers. Will fit stock 5.5mm valve guides.  Use ARC#...
    ﷼60.79
    Add to Cart The item has been added
  • DJ-1121-070 SS Intake Valve 25mm +.070 longer

    DJ-1121-070 SS Intake Valve 25mm +.070 longer

    This valve is .070 longer overall length is 2.650, head measures  25mm, and it has a radius-type keeper groove. This Valve will not work with stock retainers. Will fit stock 5.5mm valve guides.  Use ARC# DJ-1047 retainers for 22 or...
    ﷼74.25
    Add to Cart The item has been added
  • DJ-1121-150 SS Intake Valve 25mm +.150

    DJ-1121-150 SS Intake Valve 25mm +.150

    This valve is .150 longer and head measures  25mm, and it has a radius-type keeper groove. This Valve will not work with stock retainers. Will fit stock 5.5mm valve guides.  Use ARC# DJ-1047 retainers for 22 or 26lb springs, or...
    ﷼74.25
    Add to Cart The item has been added
  • DJ-1122 Stainless Steel Oversize Valve (28.5mm)

    DJ-1122 Stainless Steel Oversize Valve (28.5mm)

    (2)

    Valve head measures 28.5mm, total length is 2.580" (+/-.004"). The stock valve seat will need to be replaced with a larger ARC#6148Y valve seat. Top quality stainless steel with automotive style keepers. Will fit stock 5.5mm valve guide. Use...
    ﷼60.79
    Add to Cart The item has been added
Compare (0)
!