-
DJ-1113P CL-2 Predator Cam
Heat treated Dyno Cam for the Gen 1 & 3 Harbor Freight 212cc Predator engine. This heat treated cam was designed as a replacement for the CL-1 and should always be run with a billet...C$1,827.22Add to Cart The item has been added -
DJ-1114 CL3 Dyno Honda/Clone/Hemi Cam
(2)
The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak...C$1,827.22Add to Cart The item has been added -
DJ-1114P CL-3 Dyno Predator Non Hemi Cam
Description The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal...C$1,827.22Add to Cart The item has been added -
DJ-1117 Honda GX200/Clone CL4 Cam
DESCRIPTION The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM...C$2,019.58Add to Cart The item has been added -
DJ-1117P non hemi pred CL4 Cam
Description The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM...C$2,019.58Add to Cart The item has been added -
DJ-1290LT5 Low Tension +.005 Clone Piston Rings
Dyno testing has shown as much as 4 tenths/HP and an average of 2 tenths/HP gain using Low Tension Ring Sets over stock OEM rings. The low tension rings are heat treated in a special...C$705.86Add to Cart The item has been added -
DJ-1291LT +.010 Low Tension Ring Set
Dyno testing has shown an average of 2 tenths gain in horsepower when using DynoCams Low Tension Ring sets over STD tension .010" over ring sets. The set includes a compression ring, scraper ring,...C$645.93Add to Cart The item has been added -
DJ-1400 Dowell Pin, Hollow GX200/Clone Cyl Head
(2)
GX200/Clone Parts: 10mm Hollow Dowell Pin for attaching Cylinder HeadC$55.08Add to Cart The item has been added -
DJ-1405 Dowell Pin, 8mm Hollow Sidecover GX200/Clone
GX200/Clone Dowell Pins for sidecover 8mm Hollow These pins help keep the gasket properly aligned when replacing the cover.C$55.08Add to Cart The item has been added -
DJ-3108 GX270-GX390 Dyno 356 WLC Cam
The DynoCams 356 is a high lift modified grind that is very capable of extreme RPMs. This cam has very aggressive ramps and requires an upgraded spring package, billet rod, and billet flywheel. For...C$5,619.75Add to Cart The item has been added -
DJ-3112 GX270-GX390 Dyno 308 WLC Cam
This cam is easy on the valve train and has a very wide power band. This cam requires an upgraded spring package, billet rod, and billet flywheel.Engine: Honda GX270-GX390INTAKELIFT: .308Dur @ .050":...C$5,619.75Add to Cart The item has been added -
DJ-3114 GX270-GX390 Dyno 275 WLC Cam
(1)
This cam is to be used in mild modified applications. It will require an upgraded spring package, billet rod, and billet flywheel. Engine: Honda GX270-GX390INTAKELIFT: .276Dur @ .050": 239.5 Deg...C$5,619.75Add to Cart The item has been added
