• DJ-1137 RLV SuperBox Header

    DJ-1137 RLV SuperBox Header

    (3)

    DJ-1137  RLV SuperBox Header .930 ID Two Stage for the Honda GX200, BSP, Clone 196cc This header is designed to fit the Honda/ Clone, may not fit or may require modification for Predator engines. Call and talk to one of our techs if needed...
    L1,031.68
    Add to Cart The item has been added
  • DJ-1138B ARC Header Only for AKRA Box Stock Class

    DJ-1138B ARC Header Only for AKRA Box Stock Class

    (1)

    New, shorter, Dyno Tuned  high flow design by ARC for the AKRA and WKA  Box Stock Class.  The flanges are 1/4" thick and are CNC port matched to the exhaust ports of the BSP / Clone and GX200 engines.  The Pipe is high...
    L745.31
    Add to Cart The item has been added
  • 6888BK 3.5x4 Pre-Filter

    6888BK 3.5x4 Pre-Filter

    (7)

    A simple, inexpensive pre-filter that protects your engine without sacrificing horsepower. Clean with a mild detergent and water. Let air dry in the Sun  ***Do Not oil***
    L257.70
    Add to Cart The item has been added
  • 3504 Adjustable Motor Mount 15° International

    3504 Adjustable Motor Mount 15° International

    (1)

    Motor Mount puts engine at a 15° angle, allowing extra clearance between the air filter and right rear tire.  "International" 3 5/8" center-to-center frame rail spacing, the most common on dirt karts and sprint karts. 1-1/4" tubing size.High...
    L2,407.63
    Add to Cart The item has been added
  • 5881 GX200 Large Blower Cover

    5881 GX200 Large Blower Cover

    Blower cover , Large Hole  - this fits the GX200 clone or Predator engines.The large hole on this one allows more air in the housing.
    L157.66
    Add to Cart The item has been added
  • Sold out
    3520 Caliper Mount

    3520 Caliper Mount

    Caliper MountWeldment    This Mount was designed to work with the 3050 sized caliper. It does not work with the 3055 Mini-Lite caliper.
    L206.39
  • DJ-1051 High Performance Lash Cap

    DJ-1051 High Performance Lash Cap

    Ultra lite and hard lash cap for 5.5mm valves such as those used in GX200, clone 196cc, Predator 212CC (will not fit 3rd gen), and Yamaha F200.  For use with our aftermarket stainless steel valves when using our DJ-1046 or DJ-1047 valve spring...
    L119.25
    Add to Cart The item has been added