Go

Clone and Honda

  • Sold out
    DJ-1076 Square Tip Rocker Arm

    DJ-1076 Square Tip Rocker Arm

    Square tip rocker arm for the BSP 196cc Clone, Honda GX200, and NON Hemi Predator 212cc engines. The square tip design helps the rocker stay inline with the tip of the valve decreasing side to side rock that happens with the old style round tip rocker...
    $3.53
    Out of stock
  • DJ-1076Y Square Tip Rocker Arm (Short)

    DJ-1076Y Square Tip Rocker Arm (Short)

    Square tip rocker arm for the BSP 196cc Clone, Honda GX200 and NON Hemi Predator 212cc engines. The square tip design helps the rocker stay inline with the tip of the valve decreasing side to side rock that can happen with the old style round tip rocker...
    $3.92
    Add to Cart The item has been added
  • DJ-1095 Rocker Assembly

    DJ-1095 Rocker Assembly

    (1)

    Will NOT fit GX200 because the rocker stud has a different thread pitch where it screws into the head. Will fit predator head, gen 1 & gen 3 and clone.  This kit includes: 1 rocker arm DJ-1075  1 rocker stud DJ-1080  1 rocker...
    $5.96
    Add to Cart The item has been added
  • DJ-1100 Stamped Ratio Rocker, 1:3 ( Sold Individually )

    DJ-1100 Stamped Ratio Rocker, 1:3 ( Sold Individually )

    (4)

    Stamped Ratio RockersStamped from high grade steel for added reliability. It has a 1.3:1 ratio increase valve lift by 30% over OEM rockers. For use with stock lift, low/moderate duration cams (not suitable for BP-2, F275, 308 or higher lift/duration...
    $18.33
    Add to Cart The item has been added
  • DJ-1115 Cylinder Head, Clone-bare

    DJ-1115 Cylinder Head, Clone-bare

    (1)

    The bare head with valve guides installed and valve seats installed and cut. This head accepts the 24mm Ex & 25mm In valves.  This is a JT casting head and is legal for WKA/AKRA/NKA clone classes. It has shown good overall peak power with...
    $34.52
    Add to Cart The item has been added
  • DJ-1121 Stainless Steel Valve (25mm)

    DJ-1121 Stainless Steel Valve (25mm)

    (3)

    Valve head measures 25mm, total length is 2.575" (+/-.004") and are top quality Stainless Steel. It has an automotive radius-type keeper groove. This Valve will not work with stock retainers. Will fit stock 5.5mm valve guides.  Use ARC#...
    $23.12
    Add to Cart The item has been added
  • DJ-1121-070 SS Intake Valve 25mm +.070 longer

    DJ-1121-070 SS Intake Valve 25mm +.070 longer

    This valve is .070 longer overall length is 2.650, head measures  25mm, and it has a radius-type keeper groove. This Valve will not work with stock retainers. Will fit stock 5.5mm valve guides.  Use ARC# DJ-1047 retainers for 22 or...
    $28.24
    Add to Cart The item has been added
  • DJ-1121-150 SS Intake Valve 25mm +.150

    DJ-1121-150 SS Intake Valve 25mm +.150

    This valve is .150 longer and head measures  25mm, and it has a radius-type keeper groove. This Valve will not work with stock retainers. Will fit stock 5.5mm valve guides.  Use ARC# DJ-1047 retainers for 22 or 26lb springs, or...
    $28.24
    Add to Cart The item has been added
  • DJ-1122 Stainless Steel Oversize Valve (28.5mm)

    DJ-1122 Stainless Steel Oversize Valve (28.5mm)

    (2)

    Valve head measures 28.5mm, total length is 2.580" (+/-.004"). The stock valve seat will need to be replaced with a larger ARC#6148Y valve seat. Top quality stainless steel with automotive style keepers. Will fit stock 5.5mm valve guide. Use...
    $23.12
    Add to Cart The item has been added
Compare (0)
!