Predator 212

  • DJ-1103P Predator BP-2 Cam

    DJ-1103P Predator BP-2 Cam

    Heat treated Dyno Cam for the Gen 1 & 3 Harbor Freight 212cc Predator engine. The BP2 has a lot of extra duration producing better horsepower over a broader RPM range. This cam will easily allow your motor to turn up into the higher RPM range and...
    €55,15
    Add to Cart The item has been added
  • DJ-1104P Predator F-275 Cam

    DJ-1104P Predator F-275 Cam

    (1)

    Welded and heat treated Dyno Cam for the Gen 1 & 3 Harbor Freight 212cc Predator engine. This cam has very aggressive ramps and requires an upgraded valve train package, billet rod, and flywheel. Excellent stock appearing cam when required to...
    €107,02
    Add to Cart The item has been added
  • DJ-1108P Predator .310 Cam

    DJ-1108P Predator .310 Cam

    (1)

    The 310 is a monster camshaft with low lift. This cam has all the duration of our bigger cams, but with .310" lift so ratio rockers can be used in OHV modified applications. This cam requires an upgraded spring package, billet rod, and billet flywheel...
    €107,02
    Add to Cart The item has been added
  • DJ-1109IP Predator CL-1 Improved

    DJ-1109IP Predator CL-1 Improved

    Heat treated Dyno Cam for the Gen 1 & 3 Harbor Freight 212cc Predator engine. The CL1 Improved has a more retarded centerline for optimal top end horsepower. Legal for AKRA "Box Stock" class. This cam will NOT fit the "Hemi" Predator...
    €44,41
    Add to Cart The item has been added
  • DJ-1110P Predator CM .265L Dyno Cam

    DJ-1110P Predator CM .265L Dyno Cam

    (4)

    DESCRIPTION Dyno CM cam for the Gen 1 & 3 Harbor Freight Predator 212cc engine. This cam has an aggressive ramp and requires an upgraded spring package, billet rod, and flywheel. More duration on the intake for use with bored stock or Tillotson...
    €55,15
    Add to Cart The item has been added
  • DJ-1111P Cam MOD 2 for Predator 212cc

    DJ-1111P Cam MOD 2 for Predator 212cc

    (3)

    Heat treated Dyno Cam for the Gen 1 & 3 Harbor Freight 212cc Predator engine. "Mod 2" Cheater Stock  or Builders Prepared Class Cam for the old style non "hemi" head Harbor Freight Predator 212cc engines. Run with 10.8lbs valve springs as a...
    €55,15
    Add to Cart The item has been added
  • DJ-1112P 308 Cam, Predator Non Hemi

    DJ-1112P 308 Cam, Predator Non Hemi

    (1)

    Welded and heat treated Dyno Cam for the Gen 1 & 3 Harbor Freight 212cc Predator engine. The 308 cam is easy on the valve train and has a very wide power band. This cam requires an upgraded valve package, billet rod, and billet flywheel. When...
    €107,02
    Add to Cart The item has been added
  • DJ-1113P CL-2 Predator Cam

    DJ-1113P CL-2 Predator Cam

    Heat treated Dyno Cam for the Gen 1 & 3 Harbor Freight 212cc Predator engine. This heat treated cam was designed as a replacement for the CL-1 and should always be run with a billet flywheel. The newly designed intake and exhaust lobes...
    €44,39
    Add to Cart The item has been added
  • DJ-1114P CL-3 Dyno Predator Non Hemi Cam

    DJ-1114P CL-3 Dyno Predator Non Hemi Cam

    Description The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak horsepower. The lobes are hardened for...
    €44,39
    Add to Cart The item has been added
  • DJ-1117P non hemi pred CL4 Cam

    DJ-1117P non hemi pred CL4 Cam

    Description The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM range. The CL4 shows gains in the 6600 RPM range over our...
    €49,07
    Add to Cart The item has been added
Compare (0)
!