ARC Billet Cranks & Related

4675 Splined Clutch Post Holder

Post Holder for the ARC splined clutch post. Holder may be clamped into vise for ease of clutch maintenance and adjustment.

CHF47.70

Add to Cart The item has been added

Compare
6432 Starter Nut Briggs 5hp Flathead 5/8-18

(2)

Starter Nut for Briggs 5HP Flathead 5/8 x 18 thread pitch 1.375" overall length. Uses 3/4" socket wrench.

CHF15.78

Add to Cart The item has been added

Compare
6433 Starter Nut Animal/GX390 16 x 1.5

Starter Nut for Metric Animal and Honda GX390 16 x 1.5mm thread pitch. 1.375" overall length. Uses 3/4" socket wrench.

CHF15.78

Add to Cart The item has been added

Compare
6434 Starter Nut 5/8-18 Briggs 5HP Flathead Extended

Extended Starter Nut Briggs 5hp Flathead. Thread 5/8 - 18 and 2.625" overall length. Uses 3/4" socket wrench.

CHF15.78

Add to Cart The item has been added

Compare
6435 Starter Nut Extended Animal/GX390 16 X 1.5

Extended Starter Nut for Metric Animal/Honda GX340/39016 X 1.5mm Thread Pitch and 2.625" overall length. Uses 3/4" socket wrench.

CHF15.78

Add to Cart The item has been added

Compare
6436 Starter Nut Honda/Clone/Yamaha 14-1.5 Stubby

(1)

Starter Nut for Honda / Clone and Yamaha14-1.5mm thread pitch and 1.375" overall length. Uses 3/4" socket wrench.

CHF15.78

Add to Cart The item has been added

Compare
6532 1.005 Raptor Crank Gear

Hardened billet crank gear for the Briggs 5hp Raptor flathead. 1.005" I.D. 26 tooth.

CHF34.28

Add to Cart The item has been added

Compare
6533 Animal Billet Crank Gear

Hardened steel billet crank gear for the Briggs Animal/Intek 206 stock crankshaft.

CHF29.76

Add to Cart The item has been added

Compare
6534 Crank Gear, Animal Stroker

This Crank Gear is a must when using an ARC #6580 Crankshaft or a Briggs #555204(495645) Crank.This is the gear to use for the Animal Stroker. 1.005" I.D.

CHF34.28

Add to Cart The item has been added

Compare
6535 Crank Gear

Crank Gear for the Intek 305 Stroker * * ATTENTION * * This gear was designed to be used only with the #6585 or the #6586 ARC Billet Crankshafts. It will not fit the stock crank.

CHF29.76

Add to Cart The item has been added

Compare
6536 Crank Gear

Crank Gear GX200 6.5 OHV Stroker * * *Attention* * * This gear is designed to be used only with the 6573 Crankshaft * *

CHF21.81

Add to Cart The item has been added

Compare
6554 "Trick" Crank Bearing Mag Side Briggs 5HP Flathead ID .875 OD 2.048 W .500

(1)

Crank Bearing Mag(Flywheel) Side.ID .875" OD .2.048" Width .500"Excellent Quality aftermarket "Trick" ball bearings can be used with a variety of stock 5hp Briggs and aftermarket single and dual bearing crankshafts.

CHF11.18

Add to Cart The item has been added

Compare