BSP & GX200 Clone

  • DJ-1293-05 Total Seal Rings Low Tension +.005 196cc

    DJ-1293-05 Total Seal Rings Low Tension +.005 196cc

    These 68.125mm rings are made using only the highest quality materials, the tightest tolerances, and under the strictest quality control procedures during production to develop the most consistent low tension ring set money can buy. The rings are lapped...
    MK43,075.59
    Add to Cart The item has been added
  • DJ-1293-10 Total Seal Rings Low Tension +.010 196cc

    DJ-1293-10 Total Seal Rings Low Tension +.010 196cc

    These 68.125mm rings are made using only the highest quality materials, the tightest tolerances, and under the strictest quality control procedures during production to develop the most consistent low tension ring set money can buy. The rings are lapped...
    MK43,075.59
    Add to Cart The item has been added
  • DJ-1305 BSP/Clone Gasket Kit

    DJ-1305 BSP/Clone Gasket Kit

    (2)

    This kit includes the following: DJ-1320 Carb to intake insulator gasket DJ-1325 Intake insulator to head gasket DJ-1330 Header gasket DJ-1335 Valve cover gasket DJ-1340 Side cover gasket DJ-1315 Air box to carb spacerDJ-1310 Head gasket(...
    MK20,960.22
    Add to Cart The item has been added
  • DJ-1312 BSP/Clone High Performance Head Gasket

    DJ-1312 BSP/Clone High Performance Head Gasket

    (2)

    BSP/Clone High Performance Head Gasket  This is a Steel,  Viton Coated,  .010 Head Gasket that meets all AKRA specs for use in the Box Stock classesViton is an extremely durable, heat resistant coating that is used to insure...
    MK6,520.96
    Add to Cart The item has been added
  • DJ-1320 Carb to Intake Gasket (For Plate)

    DJ-1320 Carb to Intake Gasket (For Plate)

    (1)

    This OEM gasket for the BSP/Clone engine goes between the stock carburetor and the black intake insulator. An extra gasket is needed if a restrictor plate is used. These are good quality and dependable and priced so that anyone can keep a few extras on...
    MK1,304.19
    Add to Cart The item has been added
  • DJ-1325 Intake Insulator Gasket

    DJ-1325 Intake Insulator Gasket

    (3)

    This is a stock OEM gasket that bridges the gap between the plastic insulator and the head. This gasket is matched in size and shape to the intake port, it has proven to be both uniform in size and reliable. This is NOT the gasket used with restrictor...
    MK1,304.19
    Add to Cart The item has been added
Compare (0)
!