Camshafts

DJ-1114P CL-3 Dyno Predator Non Hemi Cam

Description The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak horsepower. The lobes are hardened for...

DJ-1117 Honda GX200/Clone CL4 Cam

DESCRIPTION The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM range. The CL4 shows gains in the 6600 RPM range over...

DJ-1117P non hemi pred CL4 Cam

Description The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM range. The CL4 shows gains in the 6600 RPM range over our...

DJ-3108 GX270-GX390 Dyno 356 WLC Cam

The DynoCams 356 is a high lift modified grind that is very capable of extreme RPMs. This cam has very aggressive ramps and requires an upgraded spring package, billet rod, and billet flywheel. For use with Tillotson or larger carb.Engine: Honda...

DJ-3112 GX270-GX390 Dyno 308 WLC Cam

This cam is easy on the valve train and has a very wide power band. This cam requires an upgraded spring package, billet rod, and billet flywheel.Engine: Honda GX270-GX390INTAKELIFT: .308Dur @ .050": 244.2 Deg. C/L: 108 ATDCEXHAUSTLIFT: .308DUR @ ...

DJ-3114 GX270-GX390 Dyno 275 WLC Cam

This cam is to be used in mild modified applications. It will require an upgraded spring package, billet rod, and billet flywheel. Engine: Honda GX270-GX390INTAKELIFT: .276Dur @ .050": 239.5 Deg. C/L: 108 ATDCEXHAUSTLIFT: .276DUR @ .050": 238.8...