Predator 224cc (Non-Hemi)

  • 6621 ARC Billet Flywheel, GX200/Clone PVL Ignition Non-Adj.

    6621 ARC Billet Flywheel, GX200/Clone PVL Ignition Non-Adj.

    (3)

    6621 flywheel for the PVL ignition. Non-Adjustable, Finned Flywheel for the GX200 / Clone 196cc Engines WILL NOT work with OEM ignition. Requires a 555681 PVL ignition coil Timing set at 29 degrees with a stock key. Minimum coil gap .030" Torque to 65...
    $54.192
    Add to Cart The item has been added
  • 6679 Clone 196cc Electric Start Billet Flywheel 3.9LB

    6679 Clone 196cc Electric Start Billet Flywheel 3.9LB

    (3)

    Billet aluminum flywheel for the electric start Honda GX200/Clone. Built from 6061-T6 aluminum features a powerful rare earth magnet and a replaceable 7075-T6 aluminum ring gear. This SFI approved flywheel features 32 degrees BTDC timing (8 degrees...
    $74.514
    Add to Cart The item has been added
  • 6689 GX200/196cc Clone Speedway Billet Flywheel

    6689 GX200/196cc Clone Speedway Billet Flywheel

    (5)

    The new 6689 billet flywheel for the Honda GX200, Clone 196, Ducar 196/212, Tillotson 196/212, Predator Ghost 212 and Predator 224cc engines from ARC Racing has an ultra low drag fin design that will greatly reduce air drag on your AKRA/NKA racing...
    $40.644
    Add to Cart The item has been added
  • 6773 Ducar/Tillotson 212cc 3.308" Billet Rod

    6773 Ducar/Tillotson 212cc 3.308" Billet Rod

    (1)

    Ducar, Tillotson 212cc, Ghost 212 and Predator 224cc when using the OEM dished piston. Standard Length Billet Rod machined from 7075-T6 heat treated aluminum to the exacting standard you have come to expect from ARC. 3.308" center to center length for a...
    $26.063
    Add to Cart The item has been added
  • 6877 Pulse Inlet Fitting

    6877 Pulse Inlet Fitting

    (1)

    Pulse Inlet Fitting These fittings go in the clone valve cover in order to pulse the fuel pump. We sell the valve cover with the fitting already installed as well.
    $0.677
    Add to Cart The item has been added
  • 6878 ARC Carb. Adapter GX390 to GX200

    6878 ARC Carb. Adapter GX390 to GX200

    (9)

    Introducing ARC's NEW  Carb Adapter. Allows Racer to Use a GX390 Carburetor on a GX200/BSP/Clone Engine  Important   Remove the OEM Black Plastic Insulator (DJ-1235) in order to use this Adapter. One side...
    $6.097
    Add to Cart The item has been added
  • 6888BK 3.5x4 Pre-Filter

    6888BK 3.5x4 Pre-Filter

    (7)

    A simple, inexpensive pre-filter that protects your engine without sacrificing horsepower. Clean with a mild detergent and water. Let air dry in the Sun  ***Do Not oil***
    $3.045
    Add to Cart The item has been added
  • 6889RD 3.5x5 Foam Pre-Filter

    6889RD 3.5x5 Foam Pre-Filter

    (1)

    Easy to clean washable foam Pre-Filter helps your filter do it's job in overly dusty conditions.  Wash with a mild detergent and water. Let air dry in the Sun.  
    $0.762
    Add to Cart The item has been added
  • 6898 Straight Air Filter

    6898 Straight Air Filter

    (1)

    Straight Air Filter. 3-1/2" x 4" x 2-7/16" flange diameter.  Wash with K&N filter cleaner or a mild detergent like Simple Green and water. Sling water out by hand and let air dry in the Sun ***Do Not blow out with compressed...
    $4.064
    Add to Cart The item has been added
  • 6899 Angled Air Filter

    6899 Angled Air Filter

    (5)

    The standard angled air filter used in most 4 cycle karting engines. 3-1/2" x 4" with a 20 degree angle. The inside diameter of the mounting flange is 2-7/16". Most OHV kart engines will require an angled air filter Wash with K&N filter cleaner or a...
    $3.722
    Add to Cart The item has been added
Compare (0)
!